PocketMagic

GU81M VTTC a different approach By vasil Posted on July 25th, 2009 , 2522 Views (Rate 1.81)

More on PocketMagic:

How to set the AVR Fusebits

Repairing a Victoreen CDV-700 6B Dosimeter

ATMega128 and HD44780 LCD using 3 Wires with the 74HC164

Developing for Blackberry 10

Dual H-Bridge for controlling two motors

USBAsp - AVR USB Programmer

July 25th, 2009 | Tags: High Voltage, tesla coil | Category: Hardware, High Voltage |  Print This Post |  Email This Post | Subscribe to comments | Leave a comment | Trackback URL

4 Responses to “GU81M VTTC a different approach”

1. 
   1
   tristan lund:
   November 13th, 2010 at 1:05 am

   what is the schematic?

2. 
   2
   Protain:
   November 25th, 2010 at 5:16 pm

   Very good performance! This VTTC seems to put out the biggest sparks I’ve seen so far for a GU81m. Why there are no construction details in this article?

3. 
   3
   Radu:
   March 16th, 2011 at 1:12 pm

   @Protain, this article has been written by a friend , vasil.

   You can see his original website, including schematics here:
   http://www.sciencezero.org/vasil/

4. 
   4
   Vacuum tube tesla coil (VTTC) using Russian GU-81m « PocketMagic:
   September 26th, 2012 at 12:57 am

   [...] 26th, 2012 Vasil gave me several of his tesla coils, including the GU-81m tesla coil presented here. Since putting everything together was not a real challenge, I decided to customize some of the [...]

Thank you for commenting. Your comment won't show until approved, which can take some time.